GVExample ValidateRemoteXMLFiles

From GreenVulcano Wiki
Jump to: navigation, search

Description

Validation of Remote XML Files

The flow is designed to show how GreenVulcano® ESB manages the files present in a Remote file system and how can perform a validation of an xml file. It is executed following these steps:

  • Reading XML files from a remote input directory via FTP (TextXML/input)
  • Validating the read files using a predefined schema
  • Coping valid and invalid files in two separated directories (TextXML/validated and TextXML/discarded)
  • Saving a file <filename>.result with the <filename> validation error message

For this example the following parameters have been used:

  • Server FTP
FTP : localhost:3021
Utente : test_user/test_user

VulCon Configuration

The implementation is the same of services ValidateXMLFiles and ValidateSingleXMLFile. It consists of two services that perform the following tasks:

  • ValidateRemoteXMLFiles: Enumerates the files to be validated
  • ValidateSingleRemoteXMLFile: Validates and moves each single file

The difference between these services is in the operations to be performed. The following table shows the operations used for each service, divided by scope:

Scope ValidateXMLFiles/ValidateSingleXMLFile ValidateRemoteXMLFiles/ValidateSingleRemoteXMLFile
Scanning XML files fsmonitor-call fsmonitor-call
Reading/download a file filereader-call remotemanager-call
Moving a file filemanager-call remotemanager-call
Writing/upload a file filewriter-call remotemanager-call

To configure this service, the steps are as follows:

  1. Definition of systems, Channels and Operations
  2. Definition of Services
  3. Flow implementation

Definition of Systems, Channels and Operations

For the definition of the system go to the VulCon core view and insert the System GVESB (if not present). Define the Channel TEST_CHANNEL_REMOTE_FILE with the following operations:

  • fsmonitor-call: This operation allows to analyse the directory "path" and return an XML report with the list of files that verify the regular expression "file-mask" ("*. \ xml") in the given directory. Set its attributes as:
Attribute Value
name ScanXMLFiles
RemoteFileSystemMonitor/path /home/test_user/TestXML/input
FileFilter/file-mask .*\.xml
FileFilter/file-type files-only
ResultFilter/existing true
InMemoryMonitorStatus dumpStatus="false"
FTPManager autoConnect="false"
hostType="UNIX" hostname="localhost"
password="{3DES}pl1YKFjWlqMfdTIbxY17Mg=="
port="3021" type="remote-manager"
username="test_user"
This operation also imposes some properties into the output GVBuffer, if files with the indicated conditions exist:
  • GVFSM_REPORT_CREATED setted to "true"
  • GVFSM_EXISTING_FILES number of file presents
  • remotemanager-call: This operation allows to move the file, which name is present into the GVBuffer property "FILE_NAME" from the directory "input" to the directory which name is present into the GVBuffer property "TARGET". The directory of destination depends on the property "TARGET" value that worflow gives when imposes it to "validated" if the XML file is correct, or "discarded" if don't. Set its attributes as:
Attribute Value
name MoveFile
FTPManager autoConnect="false"
hostType="UNIX" hostname="localhost"
password="{3DES}pl1YKFjWlqMfdTIbxY17Mg=="
port="3021" type="remote-manager"
username="test_user"
RemoteCommands/RemoteMoveCommand isCritical="true"
newName="ognl{{property['TARGET']}}/ognl{{property['FILE_NAME']}}"
oldName="input/ognl{{property['FILE_NAME']}}"
targetPath="/home/test_user/TestXML"
  • remotemanager-call: This operation allows to download the file which name is defined in the property "FILE_NAME" into the "remotePath" directory. The file content will be charged in GVBuffer.object field as array of bytes. Set its attributes as:
Attribute Value
name ReadFile
FTPManager autoConnect="false"
hostType="UNIX" hostname="localhost"
password="{3DES}pl1YKFjWlqMfdTIbxY17Mg=="
port="3021" type="remote-manager"
username="test_user"
RemoteCommands/RemoteDownloadCommand isCritical="true"
remoteFilePattern="ognl{{property['FILE_NAME']}}"
remotePath="/home/test_user/TestXML/input"
toGVBufferExpression="setObject(new java.lang.String(#input))"
  • remotemanager-call: This operation allows to upload the file which name is defined concatenating the property "FILE_NAME" with the string ".result", into the "remotePath" directory. The file content will be present into the "fromGVBufferExpression" field. Set its attributes as:
Attribute Value
name WriteStatusFile
FTPManager autoConnect="false"
hostType="UNIX" hostname="localhost"
password="{3DES}pl1YKFjWlqMfdTIbxY17Mg=="
port="3021" type="remote-manager"
username="test_user"
RemoteCommands/RemoteUploadCommand fromGVBufferExpression="getObject().getBytes()"
isCritical="true"
remotePath="/home/test_user/TestXML/discarded"
sourceFilePattern="ognl{{property['FILE_NAME']}}.result"

Definition of Services

To define a Service for reading the files present into a directory, use the voice "Wizard new Service" (right clicking the Services element) with the following parameters:

Attribute value
Service name ValidateXMLFiles
Scenario Synchronous- Synchronous
Client GVESB
Server (Participant) system = "GVESB"
channel = "TEST_CHANNEL_FILE"
request operation = "ScanXMLFiles"

The Wizard will create a flow which has to be modified successively.

Analogously, use the "Wizard New Service" for creating the service for the validation of each single XML file present in the input directory, using the following parameters:

Attribute value
Service name ValidateSingleXMLFile
Scenario Synchronous-Synchronous
Client GVESB
Server (Participant) system = "GVESB"
channel = "TEST_CHANNEL_FILE"
request operation = "ReadFile"

The Wizard will create a flow that must be modified successively.

Flow implementation

ValidateRemoteXMLFile Configuration

To define the flow for the service ValidateXMLFiles, design it as it is shown in the picture:

In this first flow all files present into the directory "dir_scanner" are read, and for each one, the service ValidateSingleXMLFile will be invoked validating it.

The following table shows the parameters to be defined for each flow operation:

Attribute value
Conditions/GVBufferCondition condition="CheckNumFiles"
Property:
name="GVFSM-EXISTING_FILES"
operator="greater"
type="gvbuffer-field"
value="0"
GVOperationNode id="dir_scanner"
id-system="GVESB"
input="input"
next-node-id="check_files"
op-type="call"
operation-name="ScanXMLFiles"
output="files"
GVNodeCheck default-id="end_nofile" id="check_files"
input="files"
on-exception-id="end_notok"
op-type="check"
GVNodeCheck/GVRouting condition="CheckNumFiles"
next-node-id="iterate_file_list
GVIteratorOperationNode id="iterate_file_list"
collection-dp="fileNamesCollectionDP"
input="files"
next-node-id="end_ok"
op-type="call"
output="single-file"
GVIteratorOperationNode/CoreCall change-log-context="true"
id-service="ValidateSingleXMLFile"
id-system="GVESB"
operation="Request
GVEndNode id="end_ok"
op-type="end"
output="files"
GVEndNode id="end_notok"
op-type="end"
output="files"
ValidateSingleRemoteXMLFile Configuration

To define the flow for ValidateSingleXMLFile Service, design the flow as it is seen from the picture:

In this flow the file in input is read, validated using a specific XSD and, depending on the result, the file will be moved in other directory or a new file will be created with the result of the failed validation.

The workflow will be invoked passing into the GVBuffer.object of input an element "File" chosen from the generated XML report of the ScanXMLFiles operation.

The following table shows the parameters to be defined for each flow operation:

Attribute value
first-node fillProperties
ChangeGVBufferNode id="fillProperties"

input="node"
next-node-id="read_validate_file"
op-type="change GVBuffer"
output="input"

ChangeGVBufferNode/ChangeGVBuffer OGNLScript: property['FILE_NAME']=@it.greenvulcano.configuration.XMLConfig@get(object,'@name')
GVOperationNode id="read_validate_file"

id-system="GVESB"
input="input"
next-node-id="check_validate"
op-type="call"
operation-name="ReadFile"

GVOperationNode/OutputServices xml-validation-service:
critical="yes"
internal="yes"
remove-fields="yes"

xml-validation-call:

default-xsd="ValidateXML.xsd"
name="ValidateXML"
return-dom="false"
xsd-policy="force-default"
GVNodeCheck default-id="validation_ok"

id="check_validate"
input="payload"
on-exception-id="validation_failed"

ChangeGVBufferNode id="validation_ok"

input="input"
next-node-id="move_file"
clear-data="false"

ChangeGVBufferNode id="validation_ok"

input="input" next-node-id="move_file" clear-data="false"

GVOperationNode OGNLScript: property['TARGET'] = 'validated'

id="move_file"
id-system="GVESB"
input="input"
next-node-id="end"
operation="MoveFile"

ChangeGVBufferNode id="validation_failed"

input="input" next-node-id="write_status" clear-data="false"

GVOperationNode OGNLScript: property['TARGET'] = 'discarded', setObject(' ' + #environment.get('payload'))

id="write_status"
id-system="GVESB"
next-node-id="move_file"
operation-name="WriteStatusFile"
input="input"

GVEndNode end-business-process="yes"

id="end"
op-type="end"
output="input"