GVExample ValidateXMLFiles

Description

The flow is designed to show how GreenVulcano^® ESB manages the files and how can perform a validation of an xml file. It is executed following these steps:

• Reading XML files from a directory of inputs
• Validating the read files using a predefined schema
• Coping valid and invalid files in two separated directories
• Saving a file <filename>.result with the <filename> validation error message

VulCon Configuration

The implementation consists of two services that perform the following tasks:

• ValidateXMLFiles: Enumerates the files to be validated
• ValidateSingleXMLFile: Validates and moves each single file

To configure this service, the steps are as follows:

1. Definition of systems, Channels and Operations
2. Definition of Services
3. Flow implementation

Definition of Systems, Channels and Operations

For the definition of the system go to the VulCon core view and insert the System GVESB (if not present). Define the Channel TEST_CHANNEL_FILE with the following operations:

• fsmonitor-call: This operation allows to analyse the directory "path" and return an XML report with the list of files that verify the regular expression "file-mask" ("*. \ xml") in the given directory. Set its attributes as:

Attribute	Value
name	ScanXMLFiles
LocalFileSystemMonitor/path	${{gv.app.home}}/TEST/TESTFS/TestXML/input
FileFilter/file-mask	.*\.xml
FileFilter/file-type	files-only
ResultFilter/existing	true
InMemoryMonitorStatus

This operation also imposes some properties into the output GVBuffer, if files with the indicated conditions exist:

• GVFSM_REPORT_CREATED setted to "true"
• GVFSM_EXISTING_FILES number of file presents

• filemanager-call: This operation allows to move a file, which name is present into the GVBuffer property "FILE_NAME" from the directory "sourcePath" to the directory ${{gv.app.home}}/TEST/TESTFS/TestXML/ ognl{{property[‘TARGET’]}}. The directory of destination depends on the property "TARGET" value that worflow gives when imposes it to "validated" if the XML file is correct, or "discarded" if don't. Set its attributes as:

Attribute	Value
name	MoveFile
FileCommands/FileMoveCommand/filePattern	ognl{{property[‘FILE_NAME’]}}
FileCommands/FileMoveCommand/sourcePath	${{gv.app.home}}/TEST/TESTFS/TestXML/input
FileCommands/FileMoveCommand/targetPath	${{gv.app.home}}/TEST/TESTFS/TestXML/ognl{{property[‘TARGET’]}}

• filereader-call: This operation allows to read the file which name is defined in the property "FILE_NAME" into the "srcPath" directory. The file content will be charged in GVBuffer.object field as array of bytes. Set its attributes as:

Attribute	Value
name	ReadFile
fileName	ognl{{property[‘FILE_NAME’]}}
srcPath	${{gv.app.home}}/TEST/TESTFS/TestXML/input"

• filewriter-call: This operation allows to write into the file which name is defined concatening the property "FILE_NAME" with the string ".result", into the "targetPath" directory. The file content will be this present into the GVBuffer.object field. Set its attributes as:

Attribute	Value
name	fileName
WriteStatusFile	ognl{{property[‘FILE_NAME’]}}.result
targetPath	${{gv.app.home}}/TEST/TESTFS/TestXML/discarded

Definition of Services

To define a Service for reading the files present into a directory, use the voice "Wizard new Service" (right clicking the Services element) with the following parameters:

Attribute	value
Service name	ValidateXMLFiles
Scenario	Synchronous- Synchronous
Client	GVESB
Server (Participant)	system = "GVESB" channel = "TEST_CHANNEL_FILE" request operation = "ScanXMLFiles"

The Wizard will create a flow which has to be modified successively.

Analogously, use the "Wizard New Service" for creating the service for the validation of each single XML file present in the input directory, using the following parameters:

Attribute	value
Service name	ValidateSingleXMLFile
Scenario	Synchronous-Synchronous
Client	GVESB
Server (Participant)	system = "GVESB" channel = "TEST_CHANNEL_FILE" request operation = "ReadFile"

The Wizard will create a flow that must be modified successively.

Flow implementation

File:GVEXamplesValidateXMLFiles.jpg

ValidateXMLFile Configuration

To define the flow for the service ValidateXMLFiles, design it as it is shown in the picture:

In this first flow all files present into the directory "dir_scanner" are read, and for each one, the service ValidateSingleXMLFile will be invoked validating it.

The following table shows the parameters to be defined for each flow operation:

Attribute	value
Conditions/GVBufferCondition	condition="CheckNumFiles" Property: name="GVFSM-EXISTING_FILES" operator="greater" type="gvbuffer-field" value="0"
GVOperationNode	id="dir_scanner" id-system="GVESB" input="input" next-node-id="check_files" op-type="call" operation-name="ScanXMLFiles" output="files"
GVNodeCheck	default-id="end_nofile" id="check_files" input="files" on-exception-id="end_notok" op-type="check"
GVNodeCheck/GVRouting	condition="CheckNumFiles" next-node-id="iterate_file_list
GVIteratorOperationNode	id="iterate_file_list" collection-dp="fileNamesCollectionDP" input="files" next-node-id="end_ok" op-type="call" output="single-file"
GVIteratorOperationNode/CoreCall	change-log-context="true" id-service="ValidateSingleXMLFile" id-system="GVESB" operation="Request
GVEndNode	id="end_ok" op-type="end" output="files"
GVEndNode	id="end_notok" op-type="end" output="files"

ValidateSingleXMLFile Configuration

To define the flow for ValidateSingleXMLFile Service, design the flow as it is seen from the picture:

In this flow the file in input is read, validated using a specific XSD and, depending on the result, the file will be moved in other directory or a new file will be created with the result of the failed validation.

The workflow will be invoked passing into the GVBuffer.object of input an element "File" chosen from the generated XML report of the ScanXMLFiles operation.

The following table shows the parameters to be defined for each flow operation:

Attribute	value
first-node	fillProperties
ChangeGVBufferNode	id="fillProperties" input="node" next-node-id="read_validate_file" op-type="change GVBuffer" output="input"
ChangeGVBufferNode/ChangeGVBuffer	OGNLScript: property[‘FILE_NAME’]=@it.greenvulcano.configuration.XMLConfig@get(ob ject,’@name’)
GVOperationNode	id="read_validate_file" id-system="GVESB" input="input" next-node-id="check_validate" op-type="call" operation-name="ReadFile”
GVOperationNode/OutputServices	xml-validation-service: critical="yes" internal="yes" remove-fields="yes" xml-validation-call: default-xsd="ValidateXML.xsd" name="ValidateXML" return-dom="false" xsd-policy="force-default”
GVNodeCheck	default-id="validation_ok" id="check_validate" input="payload" on-exception-id="validation_failed"
ChangeGVBufferNode	id="validation_ok" input="input" next-node-id="move_file" clear-data="false”
ChangeGVBufferNode	id="validation_ok" input="input" next-node-id="move_file" clear-data="false”
GVOperationNode	OGNLScript: property['TARGET'] = 'validated' id="move_file" id-system="GVESB" input="input" next-node-id="end" operation=”MoveFile”
ChangeGVBufferNode	id="validation_failed" input="input" next-node-id="write_status" clear-data="false"
GVOperationNode	OGNLScript: property['TARGET'] = 'discarded', setObject(‘‘ + #environment.get(‘payload’)) id="write_status" id-system="GVESB" next-node-id="move_file" operation-name="WriteStatusFile" input=”input”
GVEndNode	end-business-process="yes" id="end" op-type="end" output="input"